AXIS-H EMC/AXIS-H EMC+W
Check: Disc speed sensors
RAUCH Landmaschinenfabrik GmbH D-76547 Sinzheim
Customer service hotline: +49 (0)7221 985 250
E-mail: service@rauch.de
Page
1
of
2
29.10.2014
Chapter 660
Working under the spreader:
Switch off the tractor.
Secure the spreader against falling.
2. Visual inspection:
The disc speed sensor is located at the front of the angular gearbox. The
sensor is equipped with a small LED. The LED must blink when the
spreading disc is manually rotated.
3. Test/Diagnosis menu
(Figures refer to AXIS-H 30.1 EMC with CCI terminal)
First, reset all values
Reset
To Next Page
Loading...
