Rauch AXIS H EMC Series - Intended Use and Declaration of Conformity; Intended Use

Preface
AXIS-H EMC
RAUCH Landmaschinenfabrik GmbH D-76547 Sinzheim
Customer service hotline: +49 (0)7221 985 250
E-mail: service@rauch.de
Page 1
of 1
27.10.2014
M.I.
Chapter 110
Dear user of this manual
This manual is intended to support only experienced technicians in
carrying out professional repairs on RAUCH Landmaschinenfabrik
GmbH products.
Preconditions for the use of this manual are basic knowledge in
handling the products of RAUCH Landmaschinenfabrik GmbH as well
as expertise and experience in handling mechanical, hydraulic and
electronic systems.
Proper and practice-oriented handling of operating material, chemicals,
fertiliser as well as their disposal and storage are also fundamental
requirements.
Compliance with accident prevention regulations as well as knowledge
on the prevention of accidents and hazards are required. The operator
must be able to independently assess risks and hazards and to take the
corresponding measures. In the manual, hazards which cannot be
assessed or hidden risks related to the product are explicitly
highlighted.
The correctness and completeness of this manual is not guaranteed.
RAUCH Landmaschinenfabrik GmbH reserves the right to make
ongoing technical modifications in order to improve the product.
RAUCH Landmaschinenfabrik GmbH does not assume any liability for
repairs which are implemented in accordance with this manual.
The copying and distribution of documents is only permitted within the
usual scope of carrying out repairs and training.