AXIS-H EMC/AXIS-H EMC+W
Machine options >SW 2.05.00
RAUCH Landmaschinenfabrik GmbH D-76547 Sinzheim
Customer service hotline: +49 (0)7221 985 250
E-mail: service@rauch.de
Page
1
of
3
27.10.2014
Chapter 470
As of software > 2.05.00
Machine options: Settings and explanations
In the machine options, the spreader is configured
•
After an update, the machine options need to be checked
•
After replacement of the implement ECU, the machine options need to be
configured.
(Figures refer to AXIS-H 30.1 EMC with CCI terminal)
Here, the spreader logo is changed
according to the respective make
To Next Page
Loading...
