Rauch AXIS H EMC Series - Maintenance Plan Maintenance

AXIS-H EMC
Remove the gear unit
RAUCH Landmaschinenfabrik GmbH D-76547 Sinzheim
Customer service hotline: +49 (0)7221 985 250
E-mail: service@rauch.de
Page 1
of 1
04.11.2014
Chapter 540
The AXIS-H EMC is equipped with a gear unit consisting of oil motor and angular
gearbox. Angular gearbox and oil motor can be replaced separately.
AXIS-H 30.1 EMC and AXIS-H 50.1 EMC feature different oil motors. (AXIS-H 30.1
EMC = 11 cm
3
, AXIS-H 50.1 EMC = 15 cm
3
)
The angular gearboxes are identical. When placing an order, please ensure that the
correct unit and the correct side are ordered.
1. Overview of components:
Type:
AXIS
-
H 30.1 EMC (+W)
AXIS
-
H 50.1 EMC+W
Side in direction of travel left right left right
Angular gearbox
4087272 4087273 4087272 4087273
Oil motor
3087424
As of 2015:
3087489
3087425
As of 2015:
3087490
3087368
As of 2015:
3087487
3087369
As of 2015:
3087488
Gear unit (gearbox+
oil motor)
4087289 4087290 4087247 4087248
Prior to disassembly:
 Working under the spreader: Secure the spreader against accidental falling
 Take precautions against escaping oil
2. Assembly/Disassembly
Disassemble the spreading discs
Untighten the protective sheet under the
gear unit