Axis-H EMC implement ECU update
Installation and configuration of the update tool on the
PC
RAUCH Landmaschinenfabrik GmbH D-76547 Sinzheim
Customer service hotline: +49 (0)7221 985 250
E-mail: service@rauch.de
Page
1
of
4
27.10.2014
Chapter 401
PC/Laptop requirements:
a. USB interface or serial interface
b. Operating system Windows XP or newer
c. Sufficient RAM and hard disc memory must be available
d. It might be necessary to deactivate the virus scan
Download cable required
a. Update via USB interface R2058068
b. Update via serial interface R2057068
For software update, 2 update tools are required:
a. PEX-Loader for loading the PEX file
b. Teejet File Loader for loading the language packages and softkeys
1. Installation of update tools
(can be downloaded in the download centre or are delivered on a
memory stick together with the required update cable)
o With a double-click, the tools are installed on the PC.
a. PEX-Loader:
Suggested
storage location
To Next Page
Loading...
