Rauch AXIS H EMC Series - Page 77

Service information
AXIS-H EMC+W
RAUCH Landmaschinenfabrik GmbH D-76547 Sinzheim
Customer service hotline: +49 (0)7221 985 250
E-mail: service@rauch.de
Page 2
of 4
27.10.2014
Chapter 450
H
opper
empty
 Ensure that the spreader is in a
horizontal position
 Confirm empty weight
Known quantity
Upon confirmation of the empty weight, the
menu automatically switches over to Known
quantity calibration
 Load the spreader with a known
weight (e.g. fertilizer, front weights
with known weight...)
CAUTION! Ensure that the weight is
distributed equally
 Ensure that the spreader is in a
horizontal position
 Enter and confirm the weight
The calibration is completed