AXIS H-EMC/ AXIS H-EMC + W
Implement ECU software update as of
SW 2.08.00
Rauch Landmaschinenfabrik GmbH
+49 (0)7221/985-250 service@rauch.de
Page
14
of
16
Update SW
2.08.00
27/08/14
Chapter 410
Control parameters:
Menu => System/test => Service => code 3354
Page 2
Control parameters
Control parameters, page 1
Efficiency R
Efficiency L
Re-enter the efficiency of the motors
Control parameters, page 5
Velocity filter
Here, the forwards speed signal can be
dampened.
1 = minimum dampening
12 = maximum dampening, e.g. for forward speed
exceeding the GPS signal
To Next Page
Loading...
