AXIS H-EMC/ AXIS H-EMC + W
Implement ECU software update as of
SW 3.00.00
Rauch Landmaschinenfabrik GmbH
+49 (0)7221/985-250 service@rauch.de
Page
9
of
16
Update SW
3.00.00
27/08/14
Chapter 411
After selecting the file path, press OK.
5.3 Selection and transmission of the languages and the softkset.xml file
• Select the desired language in the right-hand program field. The file ending
corresponds to the country code (example: AXIS.de)
• The softkset.xml file must be transmitted at all times!
• As of software 3.00.00, a key assignment for the WTK joystick (Rauch no. 2057592)
is also provided in the file aux2File.dat. This file contains a preconfigured key
assignment for the joystick and can also be transmitted.
The softkset.xml
file must be
transmitted
Language
selection
Press the key to
start the file
transmission to the
implement ECU
Aux file for
Field-Handle
joystick
To Next Page
Loading...
