Raymarine ALPHA - Assigning a Display Group and Synchronizing Settings; Unsynchronizing Display Group Settings; Display Orientation Settings

Assigningadisplaygroupandsynchronizingsettings
Bydefaultyourperformancedisplayisnotassignedtoadisplaygroup
.
Note:
•Beforeattemptingtosynchronizeyourdevice
,ensurethatallunitsare
poweredandoperational.
•Forinformationonhowtoassignandunassignadisplaygrouponyour
multifunctiondisplay/chartplotter,refertothelatestLightHouse™4
AdvancedOperationInstructions(81406).
Inordertoassignadisplaygroup:
1.Navigateto:[Datapageview>Overlaymenu>Settings>Displaygroup].
2.Select[Group].
3.Selectthedisplaygroupthatyouwanttoassignyourperformancedisplay
to .
Thefollowinggroupsareavailable:
•[None(default)]
•[Helm1]
•[Helm2]
•[Cockpit]
•[Flybridge]
•[Mast]
•[Group1–5]
4.Onceadisplaygrouphasbeenassigned,selectthesetting(s)thatyou
wanttosynchronizebetweenyourperformancedisplayandanyother
compatibledevicesthatyouhaveassignedtothesamedisplaygroup.
Note:
Forinformationonwhichdevicesarecompatiblewiththe[Brightness],
[Screenlock]and[P ower-savemode]settings,refertothefollowing
section:p.56—Displaygroupsettings
5.Select[S ync].
6.Onceyourdeviceshavefinishedsynchronizing,a[Group(settingname)
enabled]pop-upwillappearatthetopofyourscreen.
Afterthesynchronizationprocesshascomplete,adjustmentstoyour
[Brightness],[Screenlock]and/or[Power-savemode]settingswillbeapplied
toeachsupporteddevicethatisassignedtothesamedisplaygroup.
Unsynchronizingdisplaygroupsettings
Inordertounsynchronizeyour[Brightness],[Screenlock]and[Power-save
mode]settings:
1.Navigateto:[Datapageview>Overlaymenu>Settings>Displaygroup].
2.Toggleoffthesettingthatyouwishtounsynchronize.
8.5Displayorientationsettings
Followingafactoryreset,yourscreenorientationwillautomaticallychangeto
[Landscape]or[Portrait],basedonyourinstallationorientation.
Note:
Yourperformancedisplayhasaseparateselectionofpagesthatare
availableineachscreenorientation(i.e.portraitorlandscape):
•Anydatapageswhichyouhavecreatedwillbespecifictothescreen
orientationwhichtheywerecreatedon.
•Whenswitchingbetweenscreenorientations,yourprevioussetupwill
besavedincaseyouwishtorevertbacktoyouroriginalorientation.
Inordertochangeyourscreenorientation:
1.Navigateto:[Datapageview>Overlaymenu>Settings>Display
orientation].
2.Selectbetween[L
andscape]and[Portrait].
Settings
57