9.6ImportandExport
WaypointsandTrackscanbeimportedandexported
usingaMicroSDcard.
Savingwaypointsandtrackstoamemory
card
Chartplottervariantdisplayscansavetheirwaypoints
andtrackstoMicroSDcard.
Ensureablankcard(NOTacartographycard)is
insertedintothecardreader.
FromtheChartapplication:
1.IfrequiredpresstheBackbuttontoenterMotion
mode.
2.PresstheOKbuttontodisplaythemenu.
3.SelectWaypointsorTracksasrequired.
TheWaypointsorTracklistisdisplayed.
4.SelectImport/Export.
5.SelectSaveWaypointstoCardorSaveTracks
toCardasrequired.
6.SelecttheWaypointsorTracksthatyouwantto
save,orselectSelectAll.
7.SelectSave.
Theonscreenkeyboardisdisplayed.
8.EnteraFilename.
ThedefaultlenamesareWaypointsand
Tracks.
9.SelectSave.
Aconrmationdialogisdisplayed.
10.SelectOKtoacknowledgeandreturntonormal
operation,or
11.SelectEjectdeviceifyouwanttoremovethe
MicroSDcardfromthecardreader.
Importingwaypointsortracksfroma
memorycard
Chartplottervariantdisplayscanimportwaypoints
andtracksfromMicroSDcard.
EnsurethattheMicroSDcardthatcontainsyour
savedwaypointsand/ortracksisinsertedintothe
cardreader.
FromtheChartapplication:
1.IfrequiredpresstheBackbuttontoenterMotion
mode.
2.PresstheOKbuttontodisplaythemenu.
3.SelectWaypointsorTracksasrequired.
TheWaypointsorTracklistisdisplayed.
4.SelectImport/Export.
5.SelectRetrievefromCard.
Thelebrowserisdisplayed.
6.Navigatetothegpxleyouwanttoimport.
7.Selectthele.
Aconrmationdialogisdisplayed.
8.Ifthereisanamingconictbetweenwaypointsor
tracksalreadyonyoursystemandthewaypoints
ortracksyouaretryingtoimportyouwillbe
promptedtoeither:
i.CopyasnewWaypoint—Thewaypointor
trackwillbeimportedandbeassignedthe
nextdefaultname.
ii.Copy&Replace—Thewaypointortrack
onyoursystemwillbeoverwrittenwiththe
importedwaypointortrackwiththesame
name.
iii.Don’tCopy—Thewaypointortrackwiththe
namingconictwillnotbeimported.
WhencompletedaRetrievingcompletedialog
boxisdisplayed.
9.SelectOK.
Chartapplication
83