1.Checktheselectedlocationforthemountingholster ,aclearflatareaisrequired,withsufficient
spacearoundittoplaceandremovethehandset.
2.Usingapencil,offeruptheholstertothedesiredlocationandmarkthelocationofthescrew
holesonthemountingsurface.
3.Drillthemountingholesusingasuitablesizedrillbit.
4.Holdtheholsterinplaceandsecureusingthescrewsprovided.
5.Placethehandsetintotheholsteruntilitclicksintoposition.
Installation
41
To Next Page
Loading...
