RCm KILO - Page 5

47 pages

Save Page as PDF

To Next Page

To Previous Page

INDEX PAGE

• Cleaning the detergent solution supply nozzle to the disc brush 40

(KILO version with disc brush base)

• Opening/Closing of the batteries holder case and disconnection of the batteries connector 41

• Charging the batteries 42

• Charging the batteries, for machines without on-board battery charger (Using external battery charger) 42

• Charging the batteries, for machines with on-board battery charger (upon request) 43

• Check/Replacement of fuses 44

• Disassembly/assembly of vacuum motor 45

TROUBLESHOOTING 46

SCRAPPING 47

Main Page

Table of Contents3
Introduction6
- Purpose and Contents of the Manual6
- Recipients6
- Storage of the Manual6
- Declaration of Conformity6
- Identifi Cation Data6
- Other Manuals of Reference7
- Spare Parts and Maintenance7
- Changes and Improvements7
- Operational Capabilities7
- Conventions7
Unpacking/Delivery7
Safety7
- Symbols Used8
- General Instructions8
Description of the Machine10
- Structure of the Machine10
- Steering Wheel with Control and Commands Panel11
- Safety Functions12
- Electromagnetic Brake12
- Traction Safety Micro-Switch12
- Anti-Rollover Tubes12
Technical Features13
Accessories and Components Upon Request14
Wiring Diagram 1/215
Pushing/Towing the Machine17
Use18
Batteries18
- Check/Installation of the New Batteries on a New Machine18
- Batteries Installation/Replacement18
- Setting of Type of Batteries Installed18
Preliminary Operations before Starting the Machine19
Electromagnetic Brake19
Brushes20
- Disc Brushes (Only for KILO Versions with Disc Brush Base)20
- Assembly of Disc Brush20
- Disassembly of Disc Brush20
- Selection of Type of Disc Brush21
- Selection Table of Type of Disc Brushes21
- Pad Holder Driving Disc22
- Assembly of Pad Holder Driving Disc22
- Disassembly of Pad Holder Driving Disc22
- Selection of Type of Pad Holder Driving Disc23
- Selection Table of Type of Pads23
Squeegee24
- Assembly of Squeegee24
- Disassembly of Squeegee24
- Selection of Type of Squeegee Rubbers25
- Selection Table of Type of Squeegee Rubbers25
- Installation/Removal of Squeegee Rubbers25
Tanks26
- Checking Recovery Water Tank26
- Filling the Detergent Solution Tank with Water (or Washing Water)26
- Inlet in Basic Version26
- Inlet in Version with Fi Lling Kit26
Installation/Filling "5 Liter" Detergent Tank27
Starting and Stopping the Machine28
- Starting the Machine28
- Stopping the Machine29
Machine in Operation29
- Adjustments and Checks29
Emptying of Tanks30
- Emptying of Recovery Water Tank30
- Emptying the Detergent Solution (or Washing Water) Tank30
- Emptying 5-Litre Detergent Tank (DETERSAVER - UPON REQUEST)31
- Detergent Solution (or Washing Water) Tank Level32
- Recovery Water Tank Level32
After Machine Use33
Long Downtime of Machine33
First Period of Use34
Maintenance34
- Planned Maintenance Table34
- Check of Machine Operating Hours35
- Cleaning the Squeegee35
- Check of Squeegee Rubbers36
- Replacement of Rear Squeegee Rubber36
- Replacement of Front Squeegee Rubber36
- Rearrangement of the Squeegee36
- Squeegee Height Adjustment37
- Cleaning the Disc Brush37
- Cleaning the Recovery Tank38
- Cleaning the Suction Fi Lter39
- Cleaning the Detergent Solution (or Washing Water) Fi Lter39
- Cleaning the Detergent Solution Supply Nozzle to the Disc Brush40
(KILO Version with Disc Brush Base)40
- Opening/Closing of the Batteries Holder Case and Disconnection of the Batteries Connector41
- Charging the Batteries42
- Charging the Batteries, for Machines Without On-Board Battery Charger (Using External Battery Charger)42
- Charging the Batteries, for Machines with On-Board Battery Charger (Upon Request)43
- Check/Replacement of Fuses44
- Disassembly/Assembly of Vacuum Motor45
Troubleshooting46
Scrapping47

Related product manuals

RCm KILO - Page 5

Table of Contents

Related product manuals