Red Hat DIRECTORY SERVER 7.1 User Manual

Core Server Configuration Attributes Reference
100 Red Hat Directory Server Configuration, Command, and File Reference • May 2005
nsDS5ReplicaBindDN
This multi-valued attribute specifies the DN to use when binding. Although you
can have more than one value in this cn=replica entry, you can only have one
supplier bind DN per replication agreement.The value can either be the DN of the
local entry on the consumer server or, in the case of an SSL connection, the
certificate identity associated with same DN.
nsDS5ReplicaChangeCount
This read-only attribute informs you of the total number of entries in the
changelog and whether they still remain to be replicated. When the changelog is
purged, only the entries that are still to be replicated will be left. See
“nsDS5ReplicaPurgeDelay,” on page 102, and
“nsDS5ReplicaTombstonePurgeInterval,” on page 103, for more information
regarding purge operation properties.
Syntax: Integer
Example: nsDS5Flags: 0
Entry DN: cn=replica,cn="suffixName",cn=mapping tree,cn=config
Valid Values: Any valid DN
Default Value: N/A
Syntax: DirectoryString
Example: nsDS5ReplicaBindDN: cn=replication manager,
cn=config
Entry DN: cn=replica,cn="suffixName",cn=mapping tree,cn=config
Valid Range: -1 to maximum 32-bit integer (2147483647)
Default Value: N/A
Syntax: Integer
Example: nsDS5ReplicaChangeCount: 675

Red Hat DIRECTORY SERVER 7.1 Specifications

General

Brand	Red Hat
Model	DIRECTORY SERVER 7.1
Category	Server
Language	English