Red Hat DIRECTORY SERVER 7.1 User Manual

Core Server Configuration Attributes Reference
94 Red Hat Directory Server Configuration, Command, and File Reference • May 2005
nsslapd-changelogmaxentries (Max Changelog Records)
Specifies the maximum number of records the changelog may contain. If this
attribute is absent, there is no maximum number of records the changelog can
contain. For information on the changelog, see “nsslapd-changelogdir,” on
page 92.
cn=encryption
Encryption related attributes are stored under the cn=encryption,cn=config
entry. The cn=encryption,cn=config entry is an instance of the
nsslapdEncryptionConfig object class. For encryption related attributes to be
taken into account by the server, this object class (in addition to the top object
class) must be present in the entry. Encryption configuration attributes are
presented in this section.
nssslsessiontimeout
Specifies the lifetime duration of an SSL session for both SSLv2 and SSLv3. The
minimum timeout value is 5 seconds, and, if you enter a value below this, then it
is automatically replaced by 5 seconds. Values outside the valid ranges are
replaced by the default value of 100 seconds (SSLv2).
Entry DN: cn=changelog5,cn=config
Valid Range: 0 (meaning that the only maximum limit is the disk size) to maximum
32-bit integer (2147483647)
Default Value: 0
Syntax: Integer
Example: nsslapd-changelogmaxentries: 5000
Entry DN: cn=encryption,cn=config
Valid Range: SSLv2 - 5 seconds to 100 seconds
SSLv3 - 5 seconds to 24 hours
Default Value: 0, which stands for 100 seconds if you are running SSLv2 and 24
hours if you are running SSLv3.
Syntax: Integer
Example: nssslsessiontimeout: 5

Red Hat DIRECTORY SERVER 7.1 Specifications

General

Brand	Red Hat
Model	DIRECTORY SERVER 7.1
Category	Server
Language	English