Core Server Configuration Attributes Reference
Chapter 2 Core Server Configuration Reference 57
nsslapd-errorlog (Error Log)
Specifies the pathname and filename of the log used to record error messages
generated by the Directory Server. These messages can describe error conditions,
but more often they will contain informative conditions such as these:
• Server startup and shutdown times.
• Port number the server uses.
This log will contain differing amounts of information depending on the current
setting of the Log Level attribute. See “nsslapd-errorlog-level (Error Log Level),”
on page 58, for more information.
For error logging to be enabled, this attribute must have a valid path and filename,
and the
nsslapd-errorlog-logging-enabled
configuration attribute must be
switched to
on
. The table below lists the four possible combinations of values for
these two configuration attributes and their outcome in terms of disabling or
enabling of error logging.
Entry DN: cn=config
Valid Values: Any valid filename
Default Value: serverRoot/slapd-serverID/logs/error
Syntax: DirectoryString
Example: nsslapd-errorlog:
/opt/redhat-ds/servers/slapd-phonebook/logs/error
Attributes in dse.ldif Value Logging enabled or disabled
nsslapd-errorlog-logging-enabled
nsslapd-errorlog
on
empty string
Disabled
nsslapd-errorlog-logging-enabled
nsslapd-errorlog
on
filename
Enabled
nsslapd-errorlog-logging-enabled
nsslapd-errorlog
off
empty string
Disabled
nsslapd-errorlog-logging-enabled
nsslapd-errorlog
off
filename
Disabled
To Next Page
Loading...
Need help?
General
