Red Hat DIRECTORY SERVER 7.1 User Manual

Core Server Configuration Attributes Reference
58 Red Hat Directory Server Configuration, Command, and File Reference • May 2005
nsslapd-errorlog-level (Error Log Level)
Specifies the level of logging to be used by the Directory Server. The log level is
additive; that is, specifying a value of 3 causes both levels 1 and 2 to be
performed.
To turn logging off, remove the nsslapd-errorlog-level attribute from
dse.ldif , and restart the Directory Server.
Entry DN: cn=config
Valid Values: 1 = Trace function calls. Logs a message when the server enters and
exits a function.
2 = Debug packet handling.
4 = Heavy trace output debugging.
8 = Connection management.
16 = Print out packets sent/received.
32 = Search filter processing.
64 = Config file processing.
128 = Access control list processing.
2048 = Log entry parsing debugging.
4096 = Housekeeping thread debugging.
8192 = Replication debugging.
16384 = Default level of logging used for critical errors and other
messages that are always written to the error log; for example, server
startup messages. Messages at this level are always included in the
error log, regardless of the log level setting.
32768 = Database cache debugging.
65536 = Server plug-in debugging. It writes an entry to the log file
when a server plug-in calls slapi-log-error.
Default Value: Logging is turned off (the nsslapd-errorlog-level attribute is
not included in the dse.ldif file).
Syntax: Integer
Example: nsslapd-errorlog-level: 8192

Red Hat DIRECTORY SERVER 7.1 Specifications

General

Brand	Red Hat
Model	DIRECTORY SERVER 7.1
Category	Server
Language	English