Red Hat DIRECTORY SERVER 7.1 - Nsds5 Replicabinddn; Nsds5 Replicabindmethod

Core Server Configuration Attributes Reference
Chapter 2 Core Server Configuration Reference 105
nsDS5ReplicaBindDN
Specifies the DN to use when binding. The value of this attribute must be the same
as the one in cn=replica on the consumer replica. This may be empty if
certificate-based authentication is used. This can also be modified.
nsDS5ReplicaBindMethod
Specifies the method to use for binding. This attribute can be modified.
Valid Values: Any string
Default Value: N/A
Syntax: DirectoryString
Example: description: Replication Agreement between Server A
and Server B.
Entry DN: cn=ReplicationAgreementName,cn=replica,cn="suffixName",cn=
mapping tree,cn=config
Valid Values: Any valid DN
Default Value: N/A
Syntax: DirectoryString
Example: nsDS5ReplicaBindDN: cn=replication manager,cn=config
Entry DN: cn=ReplicationAgreementName,cn=replica,cn="suffixName",cn=
mapping tree,cn=config
Valid Values: SIMPLE | SSLCLIENTAUTH
SIMPLE bind method requires a DN and password.
Default Value: SIMPLE
Syntax: DirectoryString
Example: nsDS5ReplicaBindMethod: SIMPLE