Database Link Plug-in Attributes (chaining attributes)
Chapter 3 Plug-in Implemented Server Functionality Reference 189
nsMaxTestResponseDelay
This error detection, performance-related attribute specifies the duration of the test
issued by the database link to check whether the remote server is responding. If a
response from the remote server is not returned before this period has passed, the
database link assumes the remote server is down, and the connection is not used
for subsequent operations.
nsTransmittedControls
This attribute, which can be both a global (and thus dynamic) configuration or an
instance (i.e.,
cn=database link instance,cn=chaining
database,cn=plugins,cn=config
) configuration attribute, allows you to alter the
controls the database link forwards. The following controls are forwarded by
default by the database link:
• Managed DSA, object identifier: 2.16.840.1.113730.3.4.2.
• Virtual list view (VLV), object identifier: 2.16.840.1.113730.3.4.9
• Server side sorting, object identifier: 1.2.840.113556.1.4.473
Entry DN: cn=config,cn=chaining database,cn=plugins,cn=config
Valid Values: Any valid delay period in seconds
Default Value: 15 seconds
Syntax: Integer
Example: nsMaxTestResponseDelay: 15
Entry DN: cn=config,cn=chaining database,cn=plugins,cn=config
Valid Values: Any valid OID or the above listed controls forwarded by the database
link
Default Value: None
Syntax: Integer
Example: nsTransmittedControls: 1.2.840.113556.1.4.473
To Next Page
Loading...