Migrated Configuration Attributes
Chapter 6 Migration from Earlier Versions 229
Database Attributes
All general database configuration attributes are automatically migrated. These
attributes are stored in the entry
cn=config,cn=ldbm database,
cn=plugins,cn=config
and are listed in Table 6-3.
Database-specific attributes are stored in entries of the form
cn=database_instance_name,cn=ldbm database,cn=config
. The attributes that are
migrated are listed in Table 6-4; the ones that are not migrated are listed in
Table 6-5.
nsslapd-errorlog-list Read-only attribute.
nsslapd-instancedir Configured during the installation process.
nsslapd-maxbersize Do not change the value of this attribute unless told to
do so by Red Hat Technical Support.
nsslapd-plug-in
nsslapd-result-tweak Reserved for future use. Do not change or remove.
Doing so can have unpredictable results
nsslapd-return-exact-case Do not modify unless you have legacy client
applications that can check the case of attribute names
in results returned from the server.
nsslapd-threadnumber This attribute is not available from the Directory
Server Console.
nsslapd-maxthreadsperconn This attribute corresponds to a system parameter.
Table 6-3 General Database Attributes Automatically Migrated
nsslapd-idlistscanlimit
nsslapd-lookthroughlimit
nsslapd-mode
nsslapd-dbcachesize
nsslapd-cache-autosize
nsslapd-cache-autosize-split
nsslapd-db-transaction-logging
Table 6-2 Attributes in cn=config Not Automatically Migrated (Continued)
Attribute Name Reason for not Migrating Automatically
To Next Page
Loading...
Need help?
General
