Red Hat DIRECTORY SERVER 7.1 - Nsslapd-Auditlog-Logrotationsync-Enabled (Audit Log Rotation Sync Enabled); Nsslapd-Auditlog-Logrotationsynchour (Audit Log Rotation Sync Hour)

Core Server Configuration Attributes Reference
50 Red Hat Directory Server Configuration, Command, and File Reference • May 2005
nsslapd-auditlog-logrotationsync-enabled (Audit Log Rotation Sync
Enabled)
Specifies whether audit log rotation is to be synchronized with a particular time of
the day. Synchronizing log rotation this way enables you to generate log files at a
specified time during a day, such as midnight to midnight every day. This makes
analysis of the log files much easier because they then map directly to the
calendar.
For audit log rotation to be synchronized with time-of-day, this attribute must be
enabled with the nsslapd-auditlog-logrotationsynchour and
nsslapd-auditlog-logrotationsyncmin attribute values set to the hour and
minute of the day for rotating log files.
For example, to rotate audit log files every day at midnight, enable this attribute
by setting its value to on , and then set the values of the
nsslapd-auditlog-logrotationsynchour and
nsslapd-auditlog-logrotationsyncmin attributes to 0 .
nsslapd-auditlog-logrotationsynchour (Audit Log Rotation Sync Hour)
Specifies the hour of the day for rotating audit logs. This attribute must be used in
conjunction with nsslapd-auditlog-logrotationsync-enabled and
nsslapd-auditlog-logrotationsyncmin attributes.
Syntax: Integer
Example: nsslapd-auditlog-logminfreediskspace: 3
Entry DN: cn=config
Valid Values: on | off
Default Value: off
Syntax: DirectoryString
Example: nsslapd-auditlog-logrotationsync-enabled: on
Entry DN: cn=config
Valid Range: 0 through 23