Reolink RLN8-410 User Manual

Sept 2021
QSG1_A
Reolink PoE NVR
User Manual

Reolink RLN8-410 Specifications

General

Video codecs	H.264
Display modes	Live view
Number of users	20 user(s)
Maximum resolution	3840 x 2160 pixels
Video input channels	8 channels
Supported resolutions	3840x2160, 1920x1080, 1440x900, 1280x1024, 1280x800, 1280x720, 1024x768
On/off switch	Yes
Product color	Black
Audio RCA outputs	1
Networking standards	IEEE 802.3af, IEEE 802.3at
USB 2.0 ports quantity	2
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports	9
Supported network protocols	HTTP, TCP/IP, UDP, DHCP, P2P, UPNP, RTSP, SMTP, SSL/TLS, DNS, DDNS, NTP, FTP
Power over Ethernet (PoE) ports quantity	8
Wi-Fi	No
HDD capacity	2000 GB
HDD interface	SATA, SATA II, SATA III
Maximum storage capacity	8 TB
Output current	2 A
Output voltage	48 V
Power consumption (max)	25 W
Operating temperature (T-T)	-10 - 45 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	230 mm
Width	260 mm
Height	41 mm
Weight	1200 g

Summary

NVR Introduction

Device Overview

Provides an overview of the Reolink PoE NVR models and their features.

Light Status

Explains the meaning of different LED statuses on the NVR for quick diagnostics.

NVR Kit

Describes what an NVR kit is and its advantages for users.

Setup and Installation

NVR Supportability and Hardware Versions

Details NVR models, hardware versions, and supported camera resolutions for compatibility.

Set up the NVR

Guides on connecting and powering the NVR for initial setup.

Set up the NVR on the Monitor

Guides through the initial setup wizard for language, resolution, and time zone.

Use Your System

Live View

Introduces and explains icons on the live view page for system monitoring.

Icons at the Bottom of the Live View Page

Lists and explains icons found at the bottom of the live view screen for controls.

Use PTZ

Explains basic controls for camera pan, tilt, zoom, and focus.

Preset Point

Guides on how to set and save preset positions for PTZ cameras.

Monitor Point

Details how to set monitor points and auto-return for PTZ cameras.

Patrol

Instructions for setting up horizontal cruising and patrol routines with preset points.

Change the Live View Resolution

How to adjust the main stream resolution for live view quality.

Set up Lock Screen

Configures manual and automatic screen locking for enhanced security.

Camera Settings

Covers stream, display, image settings, privacy mask, and audio/light.

More Info

How to view camera hardware number and firmware version.

Surveillance

Set up Motion Detection

Configure sensitivity, detection areas, and smart detection for motion alerts.

Set up Motion Recording

Configure motion detection to trigger recordings with schedules and extensions.

Set up Continuous Recording

Set up daily schedules for continuous video recording.

Set up Motion Alerts

Configure email alerts for motion detection, including content and interval.

Set up Exception Alert Emails

Configure email alerts for system exceptions like HDD errors or full HDD.

Buzzer

Configure NVR buzzer for motion detection and system exceptions.

Push Notification

Set up push notifications for motion detection on mobile devices.

On-Screen Warning

Configure on-screen warnings for system exceptions like HDD errors.

Set up FTP

Configure NVR to upload images or videos to an FTP server.

Replay and Download Recordings

Replay Recordings

Access and play back recorded video footage, including date and time selection.

Download Recordings

Cut video clips from recordings and download them via USB drive.

Back up Recordings

Select cameras, video types, and time range for archiving recordings.

Delete Recordings

Information on how recordings are automatically deleted or overwritten.

Storage

Format

Procedure to format the HDD, which deletes all recorded data.

Network and Connection

View NVR Network Status

Check IP address, subnet mask, default gateway, and DNS of the NVR.

Set Static IP for the NVR

Manually configure static IP address, subnet mask, and gateway.

Set up DDNS

Configure Dynamic Domain Name System settings for remote access.

Set up NTP Settings

Configure Network Time Protocol for accurate time synchronization.

Set up IP Filter Settings

Configure IP filter lists to allow or block access to the NVR.

Change the Port Settings of NVR

Modify NVR port numbers for server, HTTP, HTTPS, and other services.

Enable UPNP

Enable Universal Plug and Play for easier network configuration.

Enable ONVIF

Enable ONVIF protocol for interoperability with other systems.

System Management

General

Set device name, screen resolution, scrollview, and auto-lock time.

Time and Language

Set daylight saving time, time zone, and date/time formats.

Account Center

Manage NVR password, security questions, and user accounts.

Maintenance

Set up auto reboot, upgrade firmware, and restore system to default.

Upgrade the Firmware

Instructions for downloading and upgrading NVR and camera firmware.

Info

View NVR model, hardware, firmware versions, and UID numbers.

FAQs and Troubleshooting

FAQS

Answers to frequently asked questions about the NVR system's operation.

Troubleshooting

Guides to resolve common issues like video loss, power, and connectivity problems.