8.3 UL/CSA certified
The devices are certified according to
● UL508 (Industrial Control Equipment) and
● C22.2 No. 142-M1987 (CSA)
However, there can be combinations or extension stages with a limited or miss-
ing certification. Thus, verify the registration according to the UL marking on the
device.
Loss of UL/CSA conformity due to modifications at the device.
UL and CSA marking applies only to the device upon delivery. After
modifying the device, verify UL and CSA conformity.
To guarantee an UL/CSA-compliant operation, the following condi-
tions have to be fulfilled:
● Use only insulated copper wires suitable for at least 60/75°C.
L25, L45, L65, L75 and L85 Bosch Rexroth AG
Standards
DOK-CONTRL-IC*LX5*****-IT02-EN-P
13/53
To Next Page
Loading...
Need help?
General
