REXROTH VT-VRPD-2 - Configure

RE 30126-01-B/08.07 | Manual Hydraulics | Bosch Rexroth AG 29/76
Application: Valve control for the 4WRE6 / 4WRE10 3
Fig. 13 Plot – Overlap
The parameter in the „Offset“ entry field shifts the variable by the entered value.
In the fields „Limit +“ and „Limit –„ the positive an dnegative maximum value allowable
is specified.
Configure
the zero adjustment of the connected valve can be configured.
Clicking on the preceding icon, which is a component of the and only
accessible at level 2, also opens the “Configure“ window. A list of
existing shortcuts for the toolbar can be found in Section 4.2 „BODAC
Toolbar“.
Fig. 14 „Configure“ window
Corresponds to the BODAC main window „File menu“.
Offset
Limit
Configure
–
File menu