REXROTH VT-VRPD-2 - 3 Application: Valve Control for the 4 WRE6; 4 WRE10; Structured List for Proceeding with Startup

RE 30126-01-B/08.07 | Manual Hydraulics | Bosch Rexroth AG 16/76
Application: Valve control for the 4WRE6 / 4WRE10 3
3 Application: Valve control for the 4WRE6 / 4WRE10
3.1 Structured list for proceeding with startup
n The BODAC Software
n Data interchange between BODCA software and the controller card VT-VRPD
n Opening or creating Parameters
n Configure inputs
Setpoint using a voltage input
Setpoint using a current input
Ramp + (increasing)
Ramp - (decreasing)
Configure analog inputs
n Configure Profile
Configure structure
Setpoint configuration
Faults
n Store parameter values
n Check Process settings
Motion Data
Status
Testjacks
n Start the Application
Using software for startup
Configure inputs
Define structure
Store current status
Process settings
Starting the application