RE 30126-01-B/08.07 | Manual Hydraulics | Bosch Rexroth AG 61/76
BODAC – Menu Description 5
Fig. 42 “Security :Configure screens” window
You can use the fields assign security levels. In the “View” and “Set” column you
determine which user group is permitted to open certain windows for viewing only or
which is entitled to change parameters.
Utilities
Program changes (updates) from BODAC are in the form of files (SRecord Files) with
the suffixes:
n .hcd
n .jmt
n .pkg
Click on the menu item “Upload firmware”, and in the resulting “Open” window you
can select the update file. The BODAC program guides you through the following
steps until the program changes are complete. This utility is only available when the
USER is ONLINE with the controller.
Resets the values and parameters for the card to their factory default settings.
To Next Page
Loading...
