RE 30126-01-B/08.07 | Manual Hydraulics | Bosch Rexroth AG 57/76
BODAC – Menu Description 5
Fig. 35 “Fault Monitoring, Options” window
The operator program BODAC queries at regular intervals the fault states of the
controller card. This interval can be set here.
Fig. 36 “Options, Table Screen” window
Here, you can select the basic settings for the function “write table to controller“.
When the “Table“ screen is closed before the tables were written to the controller, the
tables are automatically written to the controller with this setting.
Fault Monitoring
Table Screen
To Next Page
Loading...
