REXROTH VT-VRPD-2 - Page 9

RE 30126-01-B/08.07 | Manual Hydraulics | Bosch Rexroth AG 9/76
Overview of the 4WRE 6 and 4WRE 10 – Valve control 2
Explanation of items 1 – 17:
No. Designation
1 U/U- or I/U-Transformer
2 Adjustment of analog inputs
3 Switching matrix
4 Power supply unit
5 Binary command value call-ups
6 Binary call-ups control
7 Adjustment of characteristic curve
8 Creator of jump function
9 Offset
10 Limitation
11 PID controller
12 Oscillator/Demodulator
13 Testjacks
14 Digital outputs
15 Fault logic
16 Local Bus
17 Serial interface
Testjacks
X1 Valve current (default)
X2 Valve command (default)
- Reference potential (0V)