© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
| support@rgblink.com | www.rgblink.com
2. The user can gain access to Background Interface through the following methods:
Use ENTER knob to move the cursor to BKG icon in Sour Selection Area, press ENTER knob once
again to enter. Or long press BKG Button along the PREVIEW Outputs Row.
3. Background Interface is shown as below: window with a green border indicates the cursor
position, while window with a red border indicate that the backgound image has been placed on
PVW window.
To add Background Source, Please follow the steps outlined as follows.
1) “+”indicates window with no source saved. If the user wants to add backgroud image to
Window 7, rotate ENTER knob to move the cursor to Window 7, press ENTER knob once again.
To Next Page
Loading...
Need help?
General