© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
| support@rgblink.com | www.rgblink.com
3.9.4 USB2 Mode
Choose USB2 Mode to set the function of USB-C interface labeled number 2.
● UVC Output: USB port can be recognized as USB webcam to connect computer or mobile
phone for streaming or video conference.
● Record: Insert U disk for recording.
● Mobile Net Connection: Use with standard data cable to share network with mobile phone.
(Refer to Smartphone Tethering).
3.10 Streaming
Push MENU Button to enter MENU. Rotate ENTER knob to move the cursor to【OUTPUT】, press
knob once again to enter the setting interface.
Note:
1. Make sure USB2 and USB1 interface are in different functions when setting USB2 mode.
2. To ensure a successful mode switch, please disconnect USB2 interface first.
To Next Page
Loading...
Need help?
General