© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
| support@rgblink.com | www.rgblink.com
To delete LOGO Source, Please follow the steps outlined as follows.
1) To delete LOGO source saved in Window 7, rotate ENTER knob to move the cursor to Window 7,
then long press ENTER knob.
2) Rotate ENTER knob to move the cursor to Delete, press the knob and then choose Confirm for
deletion.
To replace LOGO Source, Please follow the steps outlined as follows.
1) To replace LOGO source saved in Window 7, rotate ENTER knob to move the cursor to Window
7, then long press ENTER knob.
To Next Page
Loading...
Need help?
General