© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
| support@rgblink.com | www.rgblink.com
5) Same as operations in Adding Layer A and Adding Layer B, choose required layout in LAYOUT
interface and use the Joystick to quickly adjust horizontal and vertical position of OVERLAY.
To delete Overlay Source, Please follow the steps outlined as follows.
1) To delete overlay source saved in Window 7, rotate ENTER knob to move the cursor to Window
7, then long press ENTER knob.
2) Rotate ENTER knob to move the cursor to Delete, press the knob and then choose Confirm for
deletion.
To Next Page
Loading...
Need help?
General