Transmission
54
1
B Press [Manual].
To specify a destination using a Quick Dial key, see “Using the Quick Dial
Keys”.
C Enter the e-mail address destination and then press the {OK} key.
If you enter an incorrect character, press the {Clear/Stop} key. Then, re-enter
the characters correctly.
To change the e-mail address after pressing the {OK} key, press [EditDest], re-
enter an e-mail address, and then press the {OK} key.
D To add a destination, press [Add Dest].
E Specify the next destination.
To add another destination, repeat steps
D
and
E
.
F Specify the sender.
For details about specifying senders, see “Sender Settings”.
To Next Page
Loading...
