6. Remove two rubber caps [A] and cover [B] (4 screws).
7. Remove the shield plate [C] (2 screws).
8. Open the front cover and remove the front cover assembly [D] (2 screws).
9. ttach the projector unit to the holder with screws (M4 x 12).
NOTE:
When securing the screw [E], insert the spring washer [F]
between the screw and the projector unit. This spring washer
secures the grounding of the projector unit’s frame.
[B]
[A]
[C]
[D]
[F]
[E]
A172/A199 3-46 SM
To Next Page
Loading...
