ITEM EM 40K 80K 120K 160K 200K NOTE
ITEM EM 48K 96K 144K 192K 240K NOTE
Separation Belts
CRR R R R
Alcohol
Replace if necessary.
Registration, Original
width, and Feed-out
Sensors
CCC C C C
Blower brush
ATTENTION
1. When cleaning the development unit with a vacuum cleaner, always
ground the casing with your fingers to avoid damaging the toner
density sensor with static electricity.
2. When cleaning and drying the charge corona grid with cloth, be
careful not to damage the grid by allowing fibers from the cloth to
remain on the grid.
Rev. 1/97
Service
Tables
SM 4-73 A172/A199
To Next Page
Loading...
