30. Open SP Data Output P-3 (Drum Potential Control Output).
31. Check V
D
and V
L
[C] for each color. If the difference between ’Target’
and ’Actual’ for any color exceeds 5, wait 5 minutes and go back to step
28 and perform the process control self check again.
32. Touch the Index key [D].
33. Touch the Exit key [A].
34. Turn off the main switch and place the accessory switch actuator in its
original position.
35. Reinstall all parts.
36. Check the copy image and adjust the color blance if necessary.
[D]
[C]
[A]
Replacement
and
Adjustment
SM 5-19 A172/A199
To Next Page
Loading...
