Service Program Mode Tables
SM Appendix 4-103 D062/D063/D065/D066
Appendix:
Service
Program
Mode Tables
¾ Engine SP data
Therefore, whenever you perform an NVRAM upload/download, make sure to
print out the SP Data List before you perform SP5801-001 (Memory Clear: All
Clear) or SP5801-002 (Memory Clear: Engine).
NVRAM Upload/Download Procedure:
1) Print out the SP Data List from SP5990-002.
2) Perform the NVRAM data upload (to the SD card) according to the
procedure in the Service Manual.
3) Perform the memory clear (SP5801-001 or -002).
4) Perform the NVRAM data download (from the SD card) according to
the procedure in the Service Manual.
5) Input the data listed above manually.
001 All Clear Initializes items 2 to 15 below.
002 Engine Clear
Initializes all registration settings for the engine and copy process settings.
003 SCS
Initializes default system settings, SCS (System Control Service) settings,
operation display coordinates, and ROM update information.
005 MCS
Initializes the automatic delete time setting for stored documents.
(MCS: Memory Control Service)
006 Copier application
Initializes all copier application settings.
007 Fax application
Initializes the fax reset time, job login ID, all TX/RX settings, local storage file
numbers, and off-hook timer.
To Next Page
Loading...
Need help?
General
