Service Program Mode Tables
SM Appendix 4-105 D062/D063/D065/D066
Appendix:
Service
Program
Mode Tables
020 Web Uapl
NIA
021 ECS
Initializes the ECS settings.
Printer Free Run
5802
-001
Make a base engine free run.
[0 to 1/0/1]
0: Release free run mode, 1:Enable free run mode
Return this setting to off (0) after testing is completed.
Finisher connectors should be disconnected and duplex mode should be off.
5803 Input Check
See "p.4-241 "Copier Input Check: SP5803"" in the "Input/Output Check"
section.
5804 Output Check
See "p.4-251 "Copier Output Check: SP5804"" in the "Input/Output Check"
section.
5807 Option Connection Check
This SP displays whether the devices listed below are connected or not.
1: Connected, 0: Not connected.
001 ADF (1: Connect)
002 Bank (1: Connect)
003 LCT (1: Connect)
004 Fin (1: Connct)
To Next Page
Loading...
Need help?
General
