88
Edit Function: Edit Image
● Specifying “POLYGON”
Touch “AREA”.
Touch “POLYGON”.
Touch the start point of the area you want to specify.
● Decide each point of polygon so that each side
of the polygon does not cross. If they cross,
incomplete polygonal area is made.
Move your fi nger while touching the screen and release
at the end of the point. (The fi rst side is specifi ed here.)
Touch the start point of the second side and move your
fi nger while touching it and release at the end of the
point again. (The second side is specifi ed here.)
In a similar way, you can specify up to pentadecagon.
If the shape is within pentadecagon, the end point and
the start point are connected, which makes polygon, by
touching “OK”.
● You can touch “OK” after specifying the second or
more sides.
● When you want to change the start point after once
it is specifi ed, touch the start point.
REFERENCE
IMPORTANT
1
2
Release
To Next Page
Loading...
