• Tray 1 does not have the auto detect function for the paper size. On the control panel, specify the
paper size to use.
• page 191 "Specifying the Paper Size That Is Not Automatically Detected"
• You can load envelopes into Tray 2 to 4.
• page 206 "Envelope Orientation and Recommended Status"
Loading Paper into the Bypass Tray
Use the bypass tray to load paper of a size that cannot be loaded into Tray 1 to 4, such as transparency
film and label paper (adhesive labels).
The maximum number of sheets you can load into the bypass tray depends on the paper type.
page 194 "Recommended Paper Sizes and Types"
• Do not stack paper over the limit mark. If you load paper over the limit mark, the print image may
be slanted or the paper may be jammed.
Left: Plain Paper
Right: Thick Paper
DZX190
8. Adding Paper and Toner
184
To Next Page
Loading...
