Specifications for IEEE 1284 Interface Board
Item Specifications
Transmission spec IEEE 1284
Required cable Standard IEEE 1284 compliant Micro Centronics 36 pin cable
Specifications for Wireless LAN Board
• Note that the available channels (frequency ranges) and locations to use the wireless LAN are
subject to the regulations of the country or region where the printer is used. Be sure to use the
wireless LAN according to the applicable regulations.
Item Specifications
Transmission spec Based on IEEE 802.11a/b/g/n (wireless LAN)
Protocol TCP/IP
Transmission rate 2.4 GHz band: 1–130 Mbps
Frequency range (Center
Frequency)
2412–2472 MHz (1–13 channels)
Ad-hoc mode Channel
Frequency range (Center
Frequency)
2412–2462 MHz (1–11 channels)
Transmission mode • Ad-hoc mode
• Infrastructure mode
• Direct Connection Mode
• Direct Connection: Group Owner Mode
• Web Image Monitor is supported.
• The transmission rates of 130 Mbps in the 2.4 GHz band is the theoretical values of the wireless
LAN specification. The actual transmission rate may be lower, depending on the operating
environment.
List of Specifications
359
To Next Page
Loading...
