When a Message Appears While Using the
Printer Function
• When confirming or changing the settings in [Settings], press [Home] ( ) after closing [Settings].
Messages Displayed without Error Codes
The settings procedure is described using the [Classic] screen type of [Settings] as an example. When
you are using the [Standard] screen type, confirm the name of the setting items in the list below.
For details, see "Settings Menu Compatibility List (Classic to Standard Settings)", User Guide (Full
Version).
Message Cause Solution and reference
"Address Book is
currently in use by
another function.
Authentication has
failed."
The address book is
in use by another
function, and
authentication
query is not
possible.
Try again later.
"A function which
cannot be used with
Fold mode was set.
The job has been
cancelled."
A setting that cannot
be specified with
folding was
specified, and
printing was
canceled.
Check the setting, and cancel the function that cannot
be specified with the fold function.
"A job via the
network that was not
printed exists
because an error
occurred. It was
stored as a job not
printed."
When the error job
storing function is
enabled, an error
occurred in the print
job sent via the
network and the
canceled job was
stored.
• Check that the machine is connected to the
network correctly. For details about your network
environment, consult the network administrator.
• The stored document can be printed.
page 138 "Printing Documents Stored in the
Printer from the Control Panel"
9. Troubleshooting
256
To Next Page
Loading...
