Ricoh IM C3500 Series - Page 289

Message Cause Solution and reference
"Authentication has
failed."
B/W/L0208-000
B/W/L0208-002
The account is locked
because the number of
failed login attempts has
exceeded the limit.
Request the user administrator to unlock the
account.
"Authentication has
failed."
L0307-001
Web Image Monitor or
another method was
used to edit or create a
backup of the address
book.
Try again later.
"Authentication has
failed."
W0400-102
Kerberos authentication
has failed because the
server was not
responsive.
Check whether the server is operating
normally.
"Authentication has
failed."
W0400-200
Available resources are
insufficient due to too
many authentication
requests.
Try again later.
"Authentication has
failed."
W0400-202
sAMAccountName was
used as the login user
name when a user in the
child domain logged in
under a parent-child
domain environment,
and ldap_bind failed.
Use UserPrincipalName as the login user
name.
The SSL settings
specified on the
authentication server
and the device do not
match.
Check whether the SSL settings specified on
the authentication server and the device match.
"Authentication has
failed."
L0400-210
The login name attribute
is not specified, or an
attribute on which the
information cannot be
obtained is specified.
Check whether [Login Name Attribute] is
specified correctly.
See "Verifying Users to Operate the Machine
(User Authentication)", User Guide (Full
Version).
When Other Messages Are Displayed
287