• You can select only [Gray Scale], [Full Color: Text / Photo], or [Full Color: Glossy Photo]
when [High Comp. PDF] is specified in [File Type].
page 140 "Specifying the File Type When Scanning a Document"
• If you select the original type not compatible with the file format specified in [File Type], a
message suggesting you to change the file type or original type is displayed. In this case,
select a file type or original type from those suggested in the message.
When adjusting the density
• Move to the left or right to adjust the density. The colors in the scanned image
darken as you move the slider to the right.
• Select the [Auto Density] check box to adjust the density automatically when scanning an
original with a non-white background such as newspaper or a document that has show-
through.
• You can specify the shading level of [Auto Density] in [Scanner Settings] [Scan]
[Color/Density] [Background Density of ADS (Full Color)].
See "Scan (Scanner Settings)", User Guide (Full Version).
When specifying the resolution
• Select the resolution to use for scanning the original. Image quality improves as the
resolution increases, but the size of the scanned data also increases.
• To ensure the quality of scanned data, [100 dpi] cannot be selected in the following
cases:
• [High Comp. PDF] is specified in [File Type] as the file format
page 140 "Specifying the File Type When Scanning a Document"
4. To send the scanned document to an e-mail address, press [Sender] and then specify the
sender.
5. Specify the destination, and press [Start].
Scanning an Original with Suitable Quality and Density
139
To Next Page
Loading...
