8. Press [Exit].
Changing the Contents of the Program
You can change a part of the program and overwrite it or change the contents and register them as a
new program.
1. On the Home screen, press [Copy], [Fax], or [Scanner].
2. Press [Menu] ( ), and then press [Recall Program].
3. Press the program number to be changed.
4. Change the scan and output settings.
5. Press [Menu] ( ), and then press [Set Current Settings to Program].
6. Select a program number to register the changed settings, and then press [Program].
• To overwrite the program, select the number of the loaded program.
• To register the contents as a new program, select a number that is not programmed.
7. Enter a program name and select an icon.
8. Press [OK].
• To change the icon or program name or to delete the program, press [Menu] ( ) and operate
from [Edit/Delete Program].
1. Getting Started
42
To Next Page
Loading...
