Specifying Paper Type and Thickness Settings
If the print settings and the loaded paper that are used for a print job do not match, a mismatch error
occurs.
Check and specify the paper settings before you start printing.
• Before you change the settings, confirm the priority of the paper settings for printing (priority to the
printer driver or to the control panel).
On the printer driver
Check the settings of paper tray and paper type on the printer driver and make sure the settings
match the loaded paper.
On the control panel
1. Press [Settings] on the Home screen.
2. Press [Tray/Paper Settings].
3. Press [Paper Size/Paper Type] [Paper Size/Paper Type].
4. Press one tray to set.
7. Adding Paper and Toner
160
To Next Page
Loading...
