• In a field for an e-mail that was encrypted and distributed or forwarded, the encryption icon
( ) is displayed.
• To display the result of the transmission that is completed while displaying the transmission
results, close the transmission result screen and open it again.
• You cannot confirm or change an outgoing document in LAN-Fax, document waiting, or document
whose status is "Trnsmtg.".
Checking the Result in Communication Result Report
In the factory default setting, the machine is configured not to print the report automatically. Specify Auto
Print to print the report every time you send a document by Memory Transmission. When more than one
destination is specified, the report is printed after transmitting the fax to all destinations is completed.
To configure auto print, press [Fax Settings] [Others] [Report Output Settings] [Report Auto
Print Settings], and then select [Print] for [Communi. Result Rep.].
See "Others (Fax Settings)", User Guide (Full Version).
Checking the Result in Communication Failure Report
This report is printed if the fax could not be sent to all specified destinations by Memory Transmission
when Fax is not set to Auto Print (the factory default setting).
Checking the Result in Error Report
This report is printed if a fax could not be sent by Immediate Transmission when Immediate Transmission
Result Report is not set to Auto Print (the factory default setting).
Confirming the Information in Web Image Monitor
In Web Image Monitor, you can view up to 60 of the latest total results of the transmission and reception
history.
1. Log in to Web Image Monitor as the administrator.
See "Logging in to Web Image Monitor", User Guide (Full Version).
2. From the "Status/Information" menu, click [Job].
3. Click [Transmission] under [Fax History].
3. Fax
78
To Next Page
Loading...
