Ricoh IM C530 Series - Specifying the Paper Size that Is Not Automatically Detected

Specifying the Paper Size That Is Not Automatically Detected
1. Press [Settings] on the Home screen.
2. Press [Tray/Paper Settings].
D0CSPA6104
3. Press [Paper Size/Paper Type] [Paper Size/Paper Type].
4. Press the name of the tray on which the paper is loaded.
5. Clear the [Apply Auto Paper Select/Auto Tray Select] check box, and then press [Paper
Size].
D0C9PA5323
For the bypass tray, press [Paper Size: Printer].
6. Select the size of the loaded paper from the list, and then press [OK]
[OK].
7. After completing the procedure, press [Home] ( ).
Loading Paper into the Paper Tray
159