3. Align the paper guides to the paper size.
• To load paper on the bypass tray, it is better to orient it in the direction of .
• You can change the beeper setting under [Touch/Notification Sound] in [Settings] [System
Settings] [Sound].
Loading Paper into the Large Capacity Tray (LCT)
1. Pull the tray out carefully until it stops.
2. Remove paper if loaded.
3. Align the fences to the paper size.
1. Press the lever on the top of each fence to take that fence out.
Loading Paper into the Paper Tray
157
To Next Page
Loading...
