2. Copy
Basic Procedure for Copying Documents
Set the original on the exposure glass or Auto Document Feeder (ADF) to make a copy.
• If the previous setting is still active, press [Reset] before copying.
• In the following cases, match the printed paper size to the original size. If the size of the paper in
the tray is inconsistent with the size of the original, it will not print correctly.
• When you print without using [Auto Paper Select] on the paper tray or the Paper Feed Unit
• When you print by feeding paper from the bypass tray or LCT
1. Press [Copy] on the Home screen.
2. Place the original.
See "Setting an Original on the Scanner", User Guide (Full Version).
3. Select the color mode.
4. Press [+] or [-] in [Quantity] to specify the number of copies.
You can enter this using the number keys after pressing [Quantity] or a number.
53
To Next Page
Loading...
