5. Select [Envelope], and then proceed to the next screen.
6. Select the size of the envelope that you have placed in the bypass tray, and then press
[OK].
When you select [Custom Size], enter the envelope size. Measure the size of the envelope with its
flap closed.
7. Confirm the settings in the [Bypass Tray Paper Settings] screen, and then press [OK].
8. Place the original on the exposure glass.
See "Envelope Orientation and Recommended Status", User Guide (Full Version).
9. Press [Start].
Copying onto Envelopes in the Tray 1
1. Load the envelopes in Tray 1.
Orientation: portrait
Flap: close
Printing surface: upper side
2. Copy
66
To Next Page
Loading...
